BTC doing anything?

[TrustGs-R]

hell quick question....

i kno that the BTC i wired in is on....cuz my car starts...hehe..

but my question is...is there a way to tell it's REALLY doing something? (without the dyno)....

i haven't played with it enough with the butt dyno...but my imagination (or butt) says i feel the change.....

is there a more obvious way to see if the btc is actually doing anything?

TIA!

------------------
96 gsr hitting 12s
90 hybrid hatch hitting 14s

[JRSCGSR]

To check and make sure that the BTC is doing anything at all, set your timing conservative like at 10 BTDC and then go out with a friend for a test drive. While you're at WOT and running full boost, have your friend vary the knob, running from full retard(2 degrees/lb of boost) all the way down to like .5retard. You should feel a significant difference as your friend changes the settings since you'll be varying from aboutn 0 BTDC and below up to about 7 or 8 BTDC, this is how I verified that my BTC was working. Good luck...

Jon

[TrustGs-R]

that's a good idea...thanks. =)

------------------
96 gsr hitting 12s
90 hybrid hatch hitting 14s